Terex Genie GS-2669 BE, Service Manual

Page: 65 / 205

May 2015 Service Manual
Platform Controls
Part No. 1257106 GS-2669 BE • GS-3369 BE • GS-4069 BE 49
1-2
Joystick
How to Remove the Joystick
1 Push in the red Emergency Stop button to the
off position at both the ground and platform
controls.
2 Disconnect the platform controls from the
control cable at the platform.
3 Remove the fasteners securing the platform
control box to the platform control bracket.
4 Remove the fasteners securing the bottom
cover to the platform control box. Open the
control box.
5 Remove the ties securing the joystick wire
harness.
6 Carefully disconnect the joystick wire harness
from the platform controls circuit board.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
Component damage hazard.
Electrostatic discharge (ESD)
can damage printed circuit board
components. Maintain firm
contact with a metal part of the
machine that is grounded at all
times when handling printed
circuit boards OR use a
grounded wrist strap.
7 Carefully remove the joystick fasteners.
8 Carefully remove the joystick from the platform
control box.
Torque specifications
Joystick fasteners 9 in-lbs
1 Nm
1-3
Platform Controls Alarm
How to Remove the Platform
Controls Alarm
1 Push in the red Emergency Stop button to the
off position at both the ground and platform
controls.
2 Disconnect the platform controls from the
control cable at the platform.
3 Remove the fasteners securing the platform
control box to the platform control bracket.
4 Remove the fasteners securing the bottom
cover to the platform control box. Open the
control box.
5 Disconnect the red and black wires from the
alarm.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
Component damage hazard.
Electrostatic discharge (ESD)
can damage printed circuit board
components. Maintain firm
contact with a metal part of the
machine that is grounded at all
times when handling printed
circuit boards OR use a
grounded wrist strap.
6 Carefully remove the alarm from the platform
control box.