Terex Genie GS-2032, Operator'S Manual, Page: 45 / 62

Fifth Edition • Fifth Printing Operator's Manual
Operating Instructions
Part No. 114313GT GS
™
-30 • GS
™
-32 • GS
™
-46 43
Error indicator readout
If the LED diagnostic readout
displays an error code, such as LL,
push in and pull out the red
Emergency Stop button to reset the
system.
ECM Fault Codes
Code Condition
-- Condition Normal
01 Internal ECM Error
02 ECM/Platform Communication Error
03 Undefined Platform Dip Switch Setting
12 Chassis Up/Down Toggle Closed At Startup
18 Pothole Guard Failure
42 Platform Left Turn Switch Fault
43 Platform Right Turn Switch Fault
46 Platform Drive Enable Switch Fault
47 Platform Joystick Fault
52 Forward Coil Fault
53 Reverse Coil Fault
54 Up Coil Fault
55 Down Coil Fault
56 Right Coil Fault
57 Left Coil Fault
58 Brake Coil Fault
59 Parallel/Series Coil Fault
68 Low Battery Voltage
LL Off-Level
OL Overload Cutout
For more information, please consult the appropriate
Genie Service Manual.
Operation from Ground with
Controller
Maintain safe distances between the operator,
machine and fixed objects.
Be aware of the direction the machine will travel
when using the controller.
Platform Overload
Flashing OL in the LED
diagnostic readout indicates the
platform is overloaded and no
functions will operate. An alarm
will sound.
1 Push in the red Emergency Stop button to the
off position.
2 Remove weight from the platform.
3 Pull out the red Emergency Stop button to the
on position.
Battery Level Indicator
Full Low
Use the LED diagnostic readout to determine the
battery level.
How to Use the Safety Arm
1 Raise the platform approximately 2.4 m from
the ground.
2 Rotate the safety arm away from the machine
and let it hang down.
3 Lower the platform until the safety arm rests
securely on the link. Keep clear of the safety
arm when lowering the platform.