Terex Genie AL5HT, Service Manual

Page: 34 / 94

Service Manual May 2015
Checklist B Procedures
24 AL5HT Part No. 1265482
B-3
Torque the Wheel Lug Nuts
Axle specifications require that this procedure be
performed initially at 10, 25 and 50 miles of use, or
after reinstallation of a tire.
Maintaining the wheel lug nuts at proper torque is
essential to safe operation and good service life of
the tires, wheel and axle.
1 Check each lug nut for proper torque. Refer to
Specifications, Machine Specifications.
B-4
Perform Hydraulic Oil Analysis
Terex specifications require that this procedure be
performed every 250 hours or quarterly, whichever
comes first.
Replacement or testing of the hydraulic oil is
essential for good machine performance and
service life. Dirty oil and a clogged suction strainer
or hydraulic filters may cause the machine to
perform poorly and continued use may cause
component damage. Extremely dirty conditions
may require oil changes to be performed more
frequently.
Note: Before replacing the hydraulic oil, the oil may
be tested by an oil distributor for specific levels of
contamination to verify that changing the oil is
necessary. If the hydraulic oil is not replaced at the
two year inspection, test the oil quarterly. Replace
the oil when it fails the test. See E-1, Test or
Replace the Hydraulic Oil.