Terex Genie AL5HT, Service Manual

Page: 28 / 94

Service Manual May 2015
Checklist A Procedures
18 AL5HT Part No. 1265482
A-6
Perform Axle Maintenance
Axle specifications require that this procedure be
performed initially and following a wheel change
after the first 10, 25 and 50 miles.
Proper axle maintenance, following the axle
manufacturer's maintenance schedule, is essential
to good axle performance and service life. Failure
to perform the maintenance procedures can lead to
poor axle performance and component damage.
Required maintenance procedures and additional
axle information is available in the Axis Axle
Operator Maintenance Manual included with your
machine.
A-7
Torque the Wheel Lug Nuts
Axle specifications require that this procedure be
performed initially at 10, 25 and 50 miles of use, or
after reinstallation of a tire.
Maintaining the wheel lug nuts at proper torque is
essential to safe operation and good service life of
the tires, wheel and axle.
1 Check each lug nut for proper torque. Refer to
Specifications, Machine Specifications.