Terason t3000 User Manual Download Page 88

Page: 88 / 421

Chapter 4 - Acquiring Images

Working with Annotations

Terason t3000 / Echo Ultrasound System User Guide

Rotating the Indicator

You can rotate the pink rectangle to more positions by completing these steps:

Move the Windows pointer over the round end of the pink rectangle.

The pointer changes to a circular arrow.

Rotating the Body Marker

Click and move the pointer until the pink rectangle is in the desired orientation.

Click to lock the rectangle in position.

Removing the Body Marker

To remove the Body Marker from the image, right-click the body marker and select

Remove Body Marker

Summary of Contents for t3000






































































































































































































































































































































































































































Search results

Summary of Contents for t3000

Reviews:

Brands by name

Popular brands

Terason t3000, User Manual

Search results

Summary of Contents for t3000

Reviews:

Brands by name

Popular brands