Terason t3000 User Manual Download Page 67

Page: 67 / 421

Chapter 4 - Acquiring Images

Conducting an Ultrasound Exam

Terason t3000 / Echo Ultrasound System User Guide

•

For 2D, click

•

For M-Mode, click

•

For Color Doppler, click

•

For Power Doppler, Click

•

For Directional Power Doppler, Click

, then click

on the Pwr

Image Control window.

In the 2D Image Control tab, select an exam type from the Exam menu.

Choosing an Exam Type

The Terason software loads preset image control settings that are optimized for the
selected exam and the connected transducer. See Chapter 8,

Working With Exams

, on

page 212 for information about exam types and defining your own exams.

You can now use the transducer to conduct the ultrasound exam. Refer to the
appropriate clinical procedure for the exam you are conducting.

If necessary, adjust the

2D image controls

. See

Using 2D and I.Q. Controls

page 90 for instructions.

If necessary, adjust the

I.Q. image controls

. See

Controls on the I.Q. Image Control

Window

on page 100 for instructions.

If necessary, adjust the

image controls

for the selected scan mode:

•

For M-Mode, see

Using M-Mode Image Controls

on page 105.

•

For Color Doppler and Power Doppler scan modes, see

Using Color and Power

Doppler Image Controls

on page 118.

Click

. The Terason software automatically adds measure tabs to the Image

Control window. The measure tabs include measuring tools for the selected scan mode
(see Chapter 7,

Working With Measurements

, on page 150 for instructions on using

the measurement tools).

Add

annotations

(see

Working with Annotations

on page 81) as needed.

10.

Save or print the ultrasound image. See

Saving Images and Loops

on page 133 and

Printing Images

on page 146.

Summary of Contents for t3000






































































































































































































































































































































































































































Search results

Summary of Contents for t3000

Reviews:

Terason t3000, User Manual, Page: 67 / 421

Search results

Summary of Contents for t3000

Reviews: