Teradek, LLC 2020. All rights reserved. v1.3-0620
11
STATUS SCREENS
TRANSMITTER DISPLAY OPERATION
●
MAIN STATUS
- Displays the status of the wireless receiver, along with
the current video resolution, frequency, and link
quality (if connected).
●
INFO
- Displays the current voltage and internal temperature
of the unit.
●
HDMI STATUS
- Displays the current HDMI color output
Bolt 4K’s configuration menus can be accessed from either the transmitter's front
panel display or from the Bolt app.
Press the menu joystick
(G)
to cycle through the status screens or to return from the
menu.
CONFIGURATION OPTIONS
The transmitter's Wireless Settings menu contains several configurable options to
optimize your transmitter's range, quality, and reliability.
WIRELESS SETTINGS -
ENABLE BROADCAST MODE (BOLT 4K MAX)
Broadcast Mode allows you to transmit to multiple receivers simultaneously
(non-DFS frequencies only), while also extending Bolt 4K's transmission range.
WIRELESS SETTINGS
Most of the options listed in this section can also be configured using the Bolt app.
Use the Menu joystick
(G)
to navigate the transmitter's configuration options.
NOTE: Bolt 4K 750 and 1500 receivers will not link to a Bolt 4K MAX transmitter in
Broadcast Mode, even if they were previously paired.
●
Broadcast Mode Disabled
(Standard Multicast Mode)
- Transmitter and connected receiver(s) coordinate
with each other to establish which frequency to use;
the transmitter communicates with the receiver via
a downlink data channel, while the receiver
maintains an uplink data channel to the transmitter.
●
Broadcast Mode Enabled
- Data uplink channel is disabled, allowing the
transmitter to connect to an unlimited number of
receivers, as long as they have already been paired.
To achieve even better range performance, attach
the receiver to your
4K Array Panel Antenna
while
in Broadcast Mode.
