ENC-400-HDMI
™ H.264 Encoder
User Guide V 2.1
85
5.2
ENC-300-DVI™
ENC-300-
DVI™:
The ENC-300-DVI is a MPEG-4 AVC H.264 DVI encoder blade with
DVI/HDMI input (with embedded audio).
Encoding Specifications:
Standards:
PAL, NTSC
DVI/HDMI Inputs:
1x HDMI 1.3 Typ A, RGB 4:4:4, YC
b
C
r
4:4:4, YC
b
C
r
4:2:2; 1x HDMI loop
through (without HDCP); DVI supported via HDMI interface
Video Encoding:
H.264 (MPEG-4 AVC Part 10; ISO/IEC 14496-10)
Video Encoding Bitrates:
250Kb/s
– 14Mb/s, CBR/VBR,
low latency support; adjustable frame rate: 1
– 30fps
DVI Resolutions:
1920x1200, 1600x1200, 1680x1050, 1280x1024, 1024x768, 800x600
Video Resolutions:
1920x1080p 30/29.97/25Hz, 1920x1080i 60/59.94/50Hz, 1280x720p
60/59.94/50/30/29.97/25Hz, 720x480/576i 60/59.94/50Hz
Audio Inputs:
1x Stereo, unbalanced, AC-coupled, Mini-Jack 3.5
Audio nominal level: -10 dBV (0,316Vrms), Maximum level: 2 V
P-P
Microphone nominal level: -60 dBV (1mVrms),
Gain Control for microphone and line input
Minimum load resistance 20kL
HDMI embedded Audio
Audio Encoding:
MPEG-4 AAC LC (ISO/IEC 14496-3);
Supported Sample Rates: 48 kHz, 16Bit Sample Rate, 64-384 kbit data rate
Audio Outputs (Talkback): 1x Stereo, unbalanced, AC-coupled, via multipoint socket connector
Output gain adjustment from (off) -78 dB to +9 dB
Talkback: 16 bit stereo, PCM, Sample Rate 48kHz
Multiplex Format:
ISO/IEC 13818-1 Transport
ISO/IEC 14496-10 NAL (Network Abstraction Layer)
Stream Types: Transport Stream and Elementary Audio/Video* Stream
I/O Specifications:
Network:
10/100TX Ethernet, RJ45, half/full duplex, Auto-sensing or manual control
Streaming traffic:
Unicast and Multicast traffic supported
IP Protocols:
HTTP, TCP/IP Control Protocol, TCP/IP and UDP/IP Streaming, RTP,
RTCP*, SRTP*, IGMPv3, SAPv2, Unicast/Multicast, SNMPv2, DHCP
RS-232 Port*:
RS-232 connection via console (Remote control for non IP devices via
TCP/IP serial command tunneling), via multipoint socket connector
GPIO*:
1x In, non isolated, TTL 4 mA, 1x Out, non isolated, TTL 20 mA,
via multipoint socket connector
Management:
Configuration data can be stored/loaded as XML presets; Software updates
via web browser, or via Comport* Fault measurement with log file
generation*, authorization via user password, RTC (Real Time Clock)
support
Environmental:
Agency Approvals:
CE, RoHS, EN 55103-1, EN 55103-2, EN 55022
Humidity:
Up to 90%, non-condensing
Temperature:
0 to +35°C environment temperature; fan less when operated as chassis-
based device
Weight:
Approx. 160 grams
Blade Dimension (H/W/D): 20mm x 130mm x 190mm, Europe Card (160mm x 100mm, 3HE), Conform
to IEC60297-3/-4
Power:
5Vdc ±10% / 8W per blade
Limited Warranty:
1 year standard limited warranty. Warranty extensions available.
