•
Maximum number of restarts –
maximum number of restarts after timeout for restart
has expired
In the configuration example above, the controller expects ping from host with IP Address
192.168.32.103. If, within 5 seconds the controller receives no ping, the Relay will be restarted
for a period of 2 seconds, as the maximum number of consecutive restarts is limited to 5.
One of the possibilities of
TCW110
is to send e-mail messages when the status of the digital
input
Digital Input 1
is changed. To do this, the following parameters must be set:
•
Description –
brief description of the input, maximum 11 characters should be used.
•
Subject –
message subject, maximum 11 characters should be used
•
Message –
message body, maximum 22 characters should be used
In the example above, if an event occurs (closing contact) the controller will send e-mail
message to
with subject:
“Alarm”
and the text:
”Alarm is activated” .
Important!
It is necessary to set SMTP server settings on "Network Setup" page, to
successfully send e-mail messages.
Only the field “Description” can be changed for the
Analog Input 1.
Maximum 11 characters
may be used.
