Teo 4104 Installation Instructions Manual Download Page 31

Page: 31 / 76

Installation Options

13-280131 Rev. J

Page 31

You can assign line appearances, feature activators, and DSS/BLF/Speed Dial numbers to

keys, and set up the

VOICE MAIL

and

SPEAKER

keys by using this option.

From the Installation Options menu, select KEYS.

(

MENU

→

INSTL

→

KEYS)

The status indicator for each key will indicate the current setting:

Green

– Line Appearance or DSS/BLF

Red

– Feature Activator

Off

– Unused or Speed Dial

Press the line or multifunction key to be programmed.
The selected key’s indicator will alternately flash red and green.

Select LINE (Line Appearance), FA (Feature Activator), DSS (Direct Station

Select/Busy Lamp Field), SPDIAL (Speed Dial), ACD (Automatic Call

Distribution), or UNUSED from the menu.
Programming procedures for each key type are described below.

When finished editing keys, press the

key to return to the Installation

Options menu or press the

MENU

key to exit Setup Mode.

12=UNUSED £
ACD UNUSED

12=UNUSED ¤
LINE FA DSS SPDIAL

SELECT A KEY

Summary of Contents for 4104












































































Search results

Summary of Contents for 4104

Reviews:

Related manuals for 4104

Brands by name

Popular brands

Teo 4104, Installation Instructions Manual

Search results

Summary of Contents for 4104

Reviews:

Related manuals for 4104

Brands by name

Popular brands