Teo 4101, Network Administration Manual

Page: 26 / 86

13-280132 Rev. Q Page 26
U
U
p
p
d
d
a
a
t
t
e
e
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
These settings control automatic updating of telephone software and configuration
settings from a TFTP, HTTP, HTTPS, or Teo UC server.
Update Settings
XML Tag Data / Description
< update >
< update_server source =
”
src
”
>
address
</ update_server >
< protocol >
type
</ protocol >
< program_auto >
enable
</
program_auto
>
< program_time >
start hour
</ program_time >
< program_window >
hours
</ program_window >
< config_auto >
ON/OFF
</ config_auto >
< config_time >
start hour
</
config_time
>
< config_window >
hours
</ config_window >
</ update >
Update server settings.
update_server
src is source of the IP address:
: IP address or server name of the
Update Server. May be provided by DHCP or statically
assigned.
DHCP4 – use address provided by DHCPv4 Option
66, or Option 125 UpdateSrvr parameter, if
available (default)
STATIC – always use default address or name
address or name is the default address in IPv4 or
IPv6 format or DNS fully-qualified domain name.
If TFTP, HTTP or HTTPS protocol is used, a path can
be appended to the server name. This path is where
the digitally signed files are located under the update
server root directory.
protocol:
type is the protocol type for the download.
Options for type are:
TEO
TFTP
HTTP
HTTPS
NONE
If < update_server source=DHCP4 >, the type may be
provided by DHCPv4 Option 66 or 125.
program_auto: Enable/disable automatic program
updates (not used with TEO protocol).
ON
OFF (default)