PLDC04452
REVISION 00
December 23, 2020
TECHNICAL OFFICE
Stavale
Set the instrument panel board according to the type of batteries (Acid or Gel)
fitted or to be fitted, for best performance.
The discharge voltage threshold for ACID batteries is 20.5 V.
The discharge voltage threshold for GEL batteries is 21.5 V.
Selection of the type of battery is very important, as an incorrect selection may
affect battery life and operating autonomy.
The type of battery is marked on the battery casing.
The batteries can be divided into three categories: “Pb-Acd” lead-acid,
“AGM” locked acid, and “GEL”, with the plates coated by gel.
1
Turn the ignition key
A1
on the emergency button
A
to the right.
2
Press and hold the brush button
B
and the suction motor button
C
together
for around 5 seconds, and in any case until the display shows the type of batteries set.
*
*
Setting on "Traction" versions with drive
C1.1 Instrument panel board, setting the type of batteries and EcoMode
B
C
Fig. 65
Fig. 64
A
A1
33 of 68
