MAINTENANCE
810D MM310 (3--95)
76
If the main brush pattern is tapered, more
than 15 mm (0.5 in) on one end than the
other, adjust the taper at the drive end of the
brush.
A. Loosen the brush drive end plate
mounting bolts.
B. Turn the taper adjustment nut
counter-clockwise to increase the
pattern width at the brush drive end,
and clockwise to decrease the pattern
width at the brush drive end. Tighten
the drive end plate mounting bolts.
C. Check the main brush pattern and
readjust as necessary. Then adjust the
width of the main brush pattern.
00601
08450
08490
