Tennant 6500 Page 51 Operator'S Manual Download

Page: 51 / 112

OPERATION

6500 330270 (9--01)

Nylon 24-row Main Brush

-- Recommended for

severe dust conditions on rough surfaces. This

brush has excellent pickup and long life.

Fiber and Wire 24-row Main Brush

-- Offers

good sweeping action and pickup in heavy dust

concentrations. This brush is recommended

where soilage is slightly encrusted. The brush is

not recommended for heavy buildup or hard

packed soilage.

Polypropylene Side Brush

-- A good general

purpose brush for sweeping of light to medium

debris in both indoor and outdoor applications.

This brush is recommended when bristles may

get wet.

Nylon Side Brush

-- A longer life, general

purpose brush that is recommended for rough

surfaces.

Flat Wire Side Brush

-- Recommended for

outside and curb-side sweeping where soilage is

heavy or compacted. The stiff wire bristles dig out

soilage. This brush is also recommended for

foundry sweeping where heat may melt synthetic

bristles.

SWEEPING

1. Select an engine speed.

2. Make sure the hopper door light is off. If the

hopper door light is on, open the hopper

door.

08046

Summary of Contents for 6500

















































































































Search results

Summary of Contents for 6500

Reviews:

Related manuals for 6500

Brands by name

Popular brands

Tennant 6500, Operator'S Manual

Search results

Summary of Contents for 6500

Reviews:

Related manuals for 6500

Brands by name

Popular brands