Tennant 1550, Manual

Page: 62 / 628

MAINTENANCE
1550 Gas/LPG/Diesel MM283 (2--05)
3--16
TO REPLACE AIR FILTER ELEMENT -- GM
GAS AND PERKINS OR CAT DIESEL ENGINES
(For machines serial number 001424 and
above)
1. Stop the engine and set the machine
parking brake.
FOR SAFETY: Before Leaving Or
Servicing Machine; Stop On Level
Surface, Set Parking Brake, And Turn
Off Machine.
2. Open the left side and top engine access
doors.
3. Unlock the side clamps on the filter.
4. Remove the dust cap.
5. Empty the dust cap.
7. Gently pull the filter element out of the filter
housing.
B
C
A
D
353633
REMOVING AIR FILTER ELEMENT
A. Filter Element
B. Mounting Clamp
C. Dust Cap
D. Filter Housing
8. Clean the interior of the air cleaner housing
with a damp cloth. Clean the element
housing sealing surfaces.
9. Install the new filter element so the open
end of the filter is pressed over the intake
hose inside the filter housing.
10. (Machines serial number xxxxxx and above)
have a heavy duty safety element inside the
standard element. Replace this element, do
not clean it, after the regular element has
been damaged or changed three times.
11. Install the dust cap with the arrows pointing
up and the rubber dust cap on the bottom.
Lock the side clamps onto the filter to hold it
in place. Check all intake hose connections
for leaks or abrasion.
A
B
DUST CAP
A. Dust Cap
B. Rubber Dust Cap
12. Reset the air filter service indicator.
13. Close the access doors.