TM-93
7
5.5.2
RF Strength Alarm Setting:
1. Continuing the operations from 5.5, press the
button to enter the next stratum enable alarm setting.
2.
Press the “
” button: Number cursor will move towards
the right.
Press the “
” button: Numbers 0~9; the number will
increase.
Press the “
” button to save the settings and return to
the measurement screen.
3. Enable alarm high limit setting; using the measurement
range as the data, it will automatically determine whether
the yellow limit has been exceeded and reached the red
area.
If the low value set exceeded the high value, press the
“
” button and the high and low values will
automatically be switched around and saved.
