Tenmars TM-215, User Manual

Page: 14 / 27

11
5.13 Maximum and Minimum Hold
This function is designed to hold the maximum and
minimum values displayed.
Press button for 2 seconds to enter or exit the
MAX/MIN menu while holding the present maximum
or minimum value; then press button for 1
second to switch the maximum and minimum values
displayed.
5.14 Function Settings
(Setup)
This function is for modifying the setting parameters
of the meter
Press button for 2 seconds to enter or exit the
SETUP mode. As entering the SETUP mode, what
the showing button is for moving down,
button is for moving up, button is for
selection. Use the buttons to adjust the setting
function described as the following steps 1 to 10.