TM
TM
Page <2>
V1.0
27/12/19
Newark.com/exclusive-brands
Farnell.com/exclusive-brands
Element14.com/exclusive-brands
Overview
This Operating Manual covers information on safety and cautions. Please read the relevant information carefully and strictly
observe all warnings.
Warning
To avoid electric shock or personal injury, read the “Safety Information” and “Rules for Safety Operation” carefully
before using the Meter.
Digital Bench-Type True RMS Multimeter
Model 72-1015
(hereafter referred to as “the Meter”) has auto and manual range
options with maximum reading of 5999 counts and 3-5/6 digits which has a unique outlook design.
In addition to all the conventional features including DC/AC voltage, current, resistance, diode, continuity test, capacitance,
temperature °C and °F, transistor, max/min, there is a data hold, low battery display, sleep mode, RS232C serial port for easy
connection with computer to realize macro recording, monitoring and capture of transient dynamic data, displaying change of
waveform during the measurement, providing data and evidence to engineering technicians for scientific research.
Inspection
Open the package case and take out the Meter. Check the following items carefully for missing or damaged parts:
Item
Description
Qty
1
Operating Manual
1 piece
2
Test Lead
1 pair
3
Alligator Clip
1 pair
4
Multi-Purpose Socket
1 piece
5
Point Contact Temperature Probe (to be used under 230°C temperature measurement)
1 piece
6
Power Cord
1 piece
7
RS232C Interface Cable
1 piece
8
Installation guide and computer interface software (CD-ROM)
1 piece
In the event that items are found missing or damaged, contact your Tenma dealer immediately.
Safety Information
This Meter complies with the standards IEC61010: in pollution degree 2, over voltage category (CAT. I 1000V, CAT.II 600V) and
double insulation.
CAT III: Distribution level, fixed installation, with smaller transient over voltages than CAT. IV
CAT IV: Primary supply level, overhead lines, cable systems etc.
Use the Meter only as specified in this operating manual, otherwise the protection provided by the Meter may be impaired.
In this manual, a
Warning
identifies conditions and
actions that pose hazards to the user, or may damage the Meter or the equipment under test.
A Note identifies the information that user should pay special attention to.
International electrical symbols used on the Meter and in this Operating Manual are explained on page 8.
