11N Wireless Broadband Router
User Guide
¾
AP PIN (KEY): The PIN code used by default.
¾
Reset OOB: Press this button, the WPS client will
be in an idle state, and the WPS indicator will turn
off. AP will not respond to the WPS client’s
connection request and will set the security mode
as
Open-None
mode.
6.5 WDS Settings
WDS (Wireless Distribution System) is used to expand
wireless coverage area. This Router provides three
modes: Lazy, Bridge and Repeater.
¾
Lazy Mode: In this mode, the connected device
can be either in Bridge mode or Repeater mode.
Enter this router’s BSSID to establish the
connection.
¾
Bridge Mode: In this mode, you need to add the
Wireless MAC address of the connected device into
the Router's AP MAC address table or select one
from the scanning table. Click” Apply” and two
37
