11N Wireless Broadband Router
45
Lazy:
In this mode, the connected device can be Bridge
mode or Repeater mode and enter the Router’s BSSID
to establish the connection.
Bridge:
You can wirelessly connect two or more wired
networks via this mode. In this mode, you need to add
the Wireless MAC address of the connecting device into
the Router's AP MAC address table or select one from
the scanning table.
Repeater Mode
：
In this mode, add the opposing MAC
address into each own AP MAC address table by manual
or scanner to enlarge and extend the wireless radio.
Encrypt Type:
Select one from WEP, TKIP, AES for
security here.
Pass phrase:
Enter the encrypted key for wireless
devices.
AP MAC:
Input the MAC address of another (opposing)
wireless router you want to connect.
NOTE:
It is recommended that two wireless routers keep
the same bandwidth, channel number, and security
settings. Apply the settings and reboot the Router
to activate it.
