129
---End
12.3
Example of PPPoE Authentication
12.3.1
Networking requirement
A residential district uses W15E to deploy a network. The network administrator of the community disallows
tenants to apply to ISPs for broadband connections themselves, and intents to assign login username and
password to every guest using the broadband service. And the network administrator can access the internet With
an automatically obtained IP address and without a login username and password. The alter page will appear
when an account is about to expire.
12.3.2
Solution
The PPPoE authentication function of the router is recommended to address the requirement. The network
administrator of the residential district can assign an account/password to a tenant, and add his computer to an
authentication-free host rule.
12.3.3
Configuration procedure
Step 1
Set the PPPoE Authentication.
1.
Choose
PPPoE Authentication
>
Basic Settings
.
2.
Select the
Enable
check box of the
PPPoE Authentication
, and click
OK
at the bottom of the page.
