Tenda F452, User Manual

Page: 23 / 50

23
Tips ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
1. It is not advisable to change the factory default MTU value unless necessary, an improper MTU value may
degrade your network performance or even lead to network malfunction.
2. If you want to active new settings you’ve changed, you must reboot the device.
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
2.3 Port Mode
Mode includes auto,10M Half ‐ Duplex,10M Full ‐ Duplex,100M Half ‐ Duplex,100M Full ‐ Duplex,1000M
Full ‐ Duplex. Default is auto, and do not change it unless necessary.
2.4 MAC Clone
This section allows you to configure the router’s WAN MAC address.

MAC Address: Configure the router’s WAN MAC address.

Restore to Factory Default MAC: Reset the router’s WAN MAC to factory default.

Clone MAC: Clicking this button copies the MAC address of your PC to the MAC Address field in the
router.
Note
1. Normally you don't need to change the default WAN MAC value. However, some ISP’s may require the
client PC’s MAC address for Internet connection authentication. In this case, simply enter the MAC address
in the WAN MAC Address field or click the Clone MAC button. Note that the WAN MAC address in the
Status interface will be updated accordingly once you have changed it.
2. Remember to reboot the router to activate the new WAN MAC. DO NOT use the Clone MAC feature
unless required by your ISP.
3. Only the MAC addresses of the PCs on the LAN can be cloned to the router.