Tenda 6932849430219 User Manual Download Page 64

Page: 64 / 115

Wireless Modem Router

Enable QoS:

Check/uncheck to enable/disable the QoS feature.

_________________________________________________________________________________________________

Note:

1. If Enable Qos checkbox is not selected, all QoS will be disabled for all interfaces.

2. The default DSCP mark is used to mark all egress packets that do not match any classification rules.

_________________________________________________________________________________________________

QoS Queue

In ATM mode, maximum 8 queues can be configured.

In PTM mode, maximum 8 queues can be configured.

For each Ethernet interface, maximum 4 queues can be configured.

For each Ethernet WAN interface, maximum 4 queues can be configured.

To add a queue, click the

Add

button.

To remove queues, check their remove-checkboxes, then click the

Remove

button.

The

Enable

button will scan through every queues in the table. Queues with enable-checkbox checked will be enabled.

Queues with enable-checkbox un-checked will be disabled.

The enable-checkbox also shows status of the queue after page reload.

Note that if WMM function is disabled in Wireless Page, queues related to wireless will not take effects.

Summary of Contents for 6932849430219




















































































































Search results

Summary of Contents for 6932849430219

Reviews:

Related manuals for 6932849430219

Brands by name

Popular brands

Tenda 6932849430219, User Manual

Search results

Summary of Contents for 6932849430219

Reviews:

Related manuals for 6932849430219

Brands by name

Popular brands