90
_________________________________________________________________________________________________
Warning!
Changing from one policy to another of an interface will cause all defined rules for that interface to be REMOVED
AUTOMATICALLY! You will need to create new rules for the new policy.
_________________________________________________________________________________________________
Click
Add
to enter the following screen:
Here you can create a filter to identify the MAC layer frames by specifying at least one condition below. If multiple
conditions are specified, all of them take effect. Click
Save/Apply
to save and activate the filter.
Protocol Type:
Select a protocol type from the drop-down list.
Destination MAC Address:
Enter the MAC address of data frame being restricted to arrive.
Source MAC Address:
Enter the MAC address of data frame being restricted to come.
Frame Direction:
Select a frame direction from the drop-down list.
WAN Interfaces:
Select a WAN interface from the drop-down list.
4.2.6 Parental Control
This section explains the following information: