53
III Features & Configurations | Tenda
PC (218.88.93.33) at your office via the port number of 8090, follow the steps
below:
①
Enable:
Check to enable the remote Web management feature.
②
Port:
Enter 8090.
③
IP Address:
Specify the IP address for remote managemen t. Here in this
example, enter 218.88.93.33 .
④
Click
Save
to save your settings.
Type "http://102.33.66.88:8090" into your browser ’s address or location field
and you can remotely access the router from your home.
Knowledge Center
IP Address:
Here you can specify the IP address for remote management ( If set
to "0.0.0.0",
the device becomes remotely accessible to all the PCs on the
Internet or other external networks).
Port:
This is the management port to be open to outside access. The default
setting is 8080. This can be changed.
4.5 Bandwidth Control (Available only in 4G600)
If there are multiple PCs behind your device competing for limited bandwidth
resource, then you c an use this feature to specify a reasonable amount of
Summary of Contents for 4G600
Page 1: ......
Page 82: ...77 IV Appendix Tenda...
