36
III Features & Configurations | Tenda
2.6 DHCP Server
DHCP (Dynamic Host Configuration Protocol) assigns an IP addr ess to each
device on the LAN/private network. W hen you enable the DHCP Server, the
DHCP Server will automatically allocate an unused IP address from the IP
address pool specified in this screen to the requesting device as long as the
device is set to "Obt ain an IP Address Automatically". If you disable this feature,
you have to manually configure the TCP/IP settings for all PCs on your LAN to
access the Internet.
Click
Basic -> DHCP Server
to enter the screen below. Here you can change
the DHCP IP address pool and lease time.
Configuration Procedures:
①
DHCP Server - Enable:
Check/uncheck the box to enable or disable the
DHCP server feature.
②
Start IP/End IP:
You can specify the starting and ending address es of the IP
address pool here. These addresses shoul d be part of the same IP address
subnet as the device
’s LAN IP address.
Summary of Contents for 4G600
Page 1: ......
Page 82: ...77 IV Appendix Tenda...