Tenda 4G600, User Manual

Page: 28 / 89

23
III Features & Configurations | Tenda
2 Basic Settings

To change the device's login IP address, see 2.1 LAN Settings .

To set up the Internet, see 2.2 WAN Settings .

To set up speed and duplex mode for the W AN port, see 2.3 WAN Speed
(Available only in Wireless Router Mode) .

To configure DNS server, see 2.4 DNS Settings .

To clone MAC address, see 2.5 MAC Clone (Available only in Wireless
Router Mode) .

To configure DHCP server, see 2.6 DHCP Server .

To assign static IP addresses and view LAN device information, see 2.7
DHCP Client List .
Note
In the Universal Repeater Mode , only the LAN Settings screen is available.
2.1 LAN Settings
Here you can configure the LAN IP address and subnet mask. This IP address is
to be used to access the device’s settings through a Web browser. Be sure to
make a note of any changes you apply to this page.
Tip
①
Default IP address and subnet mask are respec tively 192.168.0.1 and
255.255.255.0.
②
If you change the LAN IP address of the device, you have to open a new
connection to the new IP address and log in again. Also, you have to set the
default gateway addresses of all LAN PCs to this new IP address.
③
The device's LAN IP address and WAN IP address must be on different IP