background image

                                                              3G 11N Wireless Router 

                                                         

49

 

¾

 

WPA Algorithms

Provides TKIP [Temporal Key 

Integrity Protocol] or AES [Advanced Encryption 
Standard].  

¾

 

Key Renewal Interval

Set the key’s renewal 

period. 

¾

 

Radius Server Address

Enter the IP address of 

the Radius server. 

¾

 

Radius Server port

Enter the authentication 

port of the Radius server. The default is 1812. 

¾

 

Shared Key

Enter the shared key for 

authentication server with 8~63 ASCII characters. 

¾

 

Session Timeout

  The authentication interval 

period between the Router and authentication 
server. The default is 3600s. 

 
7.2.6 802.1X 
This  security  mode  is  used  when  a  RADIUS  server  is 
connected to the device. 802.1x, a kind of Port-based 
authentication protocol, is an authentication type and 
strategy for users. The port can be either a physic port 
or logic port (such as VLAN). For wireless LAN users, a 
port is just a channel. The final purpose of 802.11x 
authentication is to check if the port can be used. If the 
port is authenticated successfully, you can open this 
port which allows all the messages to pass. If the port 
isn’t authenticated successfully, you can keep this port 
“disable” which just allows 802.1x authentication 

Summary of Contents for 3G622R+


















































































































Reviews: