TEMPUR® Ardennes and Moulton Standard Divans,
and Headboards
Installation & Assemby Instructions
Fitting Castors
– Unpack the base (both halves where
applicable), lay base upside down and take off attached bag
containing castors, linking bars, bolts and headboard bolts.
Place castor into
the insert as shown…
Linking
–
Turn the bases over on to castors. Place both halves
of the base next to each other and fit silver linking bar to the
head (top) end. F
asten bolts tightly as shown…
Then repeat at foot (bottom)
end of the base ….
Attaching Headboards
– When fitting headboards pierce the
fabric beneath the stickers which mark where the headboard
bolt holes are. Check the bolts can thread correctly by screwing
them into the hole.
