FSP200
Tempo Communications Inc.
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
28
Sensor Value
The barometric pressure and temperature at the electrode are displayed here.
Load Default
The user can reset all settings to factory settings
Update
Provides the utility to update the firmware.
Password
Provides the technician the opportunity to create a password to prevent the FSP200 from being used by unauthorized users.
The fusion password will allow the splicer to be accessed but a splice can not be made without the password. The fusion limit
password will allow a preset number of splices to be made before access will be denied. This is useful in demonstration or
rental situations.
When the password function is enabled, select “Set Password”. Select characters, add spaces, delete characters, or confirm.
(The password max. length is 8, and it can be uppercase letters, lowercase letters, numbers, or symbols ). Finish setting by
selecting “FINISH”.
When the splicer is restarted, the password interface is displayed. Customer can use the password to unlock.
To cancel the password function, select “Set password”, and then select “FINISH” (input nothing for password).
For service
In the password interface, there is “Super password,” and the “[XX]” following is the coordinate of “super-password.xlsx.”
By using the super password, the user or service staff can unlock the splicer to renew the password. The super password is
obtained from Tempo Communications customer service. For each restart, the [XX] is changed, so the user cannot use the last
super password again and needs to contact customer service.