FSP200
Tempo Communications Inc.
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
20
(1) Select Splice Mode
Select “S–Mode” to access the available splicing modes. Use the arrow keys to highlight the desired splicing mode. Then press
OK to confirm.
Select an appropriate splice mode for the type of fiber to be spliced, and use the arrow keys to select the splice mode. Then
press OK to confirm.
Note: “1 AUTO SM/NZ/DS/MM” mode is recommended for splicing in most cases. In this mode, the splicer automatically
adjusts splice parameters according to the fiber type.
(2) Edit Splice Mode
Splicing parameters in each splice mode can be modified.
In “Select Splice Mode” menu, press u to enter “Edit Splice Mode” and modify the splice mode .
Use the arrow keys to select the parameter to be modified, and then press OK to enter the parameter setting.
Use the arrow keys to modify the parameter, and then press OK to confirm.