Tempo Fitness AOF-C1BT011 Assembly Instructions Manual Download Page 3

IMPORTANT: Please read this manual carefully, and keep it for future reference.

• This piece of furniture is intended for use in domestic environments. It is not suitable for commercial, industrial or trade

use. Do not use it for any other purpose, and only use it as described in this manual.

Assembly to be carried out by a competent adult only. Please check all parts and hardware are available and

undamaged before use.

• During assembly children should be kept away from the product due to possible risk of injury.
• Do not use this item if any components are missing or damaged.
• Regularly check all fastenings to ensure that they properly tightened.
• Do not use the unit outdoors. It is for indoor use only.
• Keep away from fire and heat sources.
• Be aware of the risk of open fires and other sources of strong heat in the vicinity of the product.
• Do not use this product in a bathroom or laundry, or where it can be splashed with water.
• This item of furniture is not intended to be assembled by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge.

• Handle this product with care. Do not shake the product vigorously or drop it from an elevation. Doing so will damage

the product or shorten its lifespan. Do not sit or stand on the item of furniture, which may lead to potential injury. Do not

press hard on top of the unit or place very heavy things on top of it.

Always place the product on a dry, stable, level and horizontal surface. Never place it on an inclined or uneven surface.

• Do not locate the item of furniture near appliances that get hot during use, such as heaters, ovens or fireplaces. Avoid

long-term exposure to direct sunshine.

• We accept no responsibility for any eventual injury or damage caused by improper installation, misuse or noncompliance

with the instructions.

• These instructions are not intended to cover every possible condition and situation. As with any product, common sense

and caution are therefore always recommended when assembling, using and maintaining the item of furniture.

• Do not over-tighten fixtures.
• Power tools are not recommended for assembly.
• This item of furniture is heavy - take care when moving it. Multiple people or a mechanical aid may be required.

Important Safety Information

3

Summary of Contents for AOF-C1BT011












Reviews: