3
OPERATING THE URC
Normal Operation
Once you have set up the URC for your A/V equipment, it works like your
original remote control. To operate, just aim it at your equipment, press an
appropriate device mode key and invoke the desired function by pressing a
corresponding key on the URC. The indicator flashes during signal transmission
and as confirmation of key touch.
Punch Through
Punch Through Channel
Punch through channel allows you to operate channel up and down without
having to switch the device modes repeatedly even when your URC is in other
operating modes.
To activate the punch through channel setting:
1. Press desired Device Mode Key (e.g. ).
2 Press and Hold “
CH+
” key.
3. Press desired Device Mode Key (e.g. ).
4. Release “
CH+
” (the indicator flashes once if the setting is activated).
To deactivate the punch through channel setting:
1. Press desired Device Mode Key (e.g. ).
2. Press and Hold “
CH
–
” key.
3. Press desired device Mode Key (e.g. ).
4. Release “
CH
–
” (the indicator flashes twice if the setting is deactivated).
Punch Through Volume
Punch through volume allows you to operate volume up and down without
having to switch the device modes repeatedly even when your URC is in other
operating modes.
To activate the punch through volume setting:
1. Press desired Device Mode Key (e.g. ).
2 Press and Hold “
VOL+
” key.
3. Press desired Device Mode Key (e.g. ).
4. Release “
VOL+
” (the indicator flashes once if the setting is activated).
To deactivate the punch through volume setting:
1. Press desired Device Mode Key (e.g. ).
2. Press and Hold “
VOL–
” key.
3. Press desired Device Mode Key (e.g. ).
4. Release “
VOL–
” (the indicator flashes twice if the setting is deactivated).
Macro Power
Macro Power allows you to turn two of your A/V equipment on/off simultaneously.
To activate the macro power setting:
1. Press desired Device Mode Key (e.g. ).
2 Press and Hold “
” key.
3. Press desired Device Mode Key (e.g. ).
4. Release “
” (the indicator flashes once if the setting is activated).
To deactivate the macro power setting:
1. Press desired Device Mode Key (e.g. ).
2. Press and Hold “
” key.
3. Press desired Device Mode Key (e.g. ).
4. Release “
” (the indicator flashes twice if the setting is deactivated).
–
8
–
GB
4
ADVANCED OPERATION
Secondary Function
Symbols of the secondary functions are printed in different colours on the
panel, and a SECONDARY FUNCTION TABLE is included on the inside page
of the coversheet. To invoke a secondary function, press followed by a
corresponding function key.
5
MAINTENANCE
1. Do not expose your URC to dust, strong sunlight, humidity, high temperatures
or mechanical shocks.
2. Do not use old and new batteries together as old batteries tend to leak.
3. Do not use corrosive or abrasive cleansers on your URC.
4. Keep the unit dust free by wiping it with a soft, dry cloth.
5. Do not disassemble your URC, it contains no user-serviceable parts.
6
TROUBLESHOOTING
Q.
My URC does not work at all!
A. Check your A/V device, if the device’s main switch is turned off, your URC
cannot operate your device.
A. Check whether your batteries are inserted properly and are in the c/-
position.
A. Check whether you have pressed the corresponding device mode key for
your device.
A. If the batteries are low, replace the batteries.
Q.
If several Device Codes are listed under the brand of my A/V device, how
can I select the correct Device Code?
A. To seek the correct Device Code for your A/V device, test the codes one by
one until most keys work properly.
Q.
My A/V equipment responds only to some of the commands.
A. You have set a code for which only some commands work properly but some
do not. Try other codes until most keys work properly.
–
9
–
GB
TV
SAT
TV
SAT
TV
SAT
TV
SAT
TV
SAT
TV
SAT
SHIFT