manualshive.com logo in svg

Temelsan DK 1500 LS, User Manual, Page: 16 / 74

Share
Download
Temelsan DK 1500 LS User Manual Download Page 16

 

P a g e

 | 15

 

 

 

 

TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ. 

 

Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1 Esenyurt / İstanbul / TÜRKİYE

 

TEL: +90 (212) 544-2518  FAX: +90 (212) 577-6557  www.temelsan.com   [email protected] 

 

9.3.

 

OPERATIONAL INSTRUCTIONS 

9.3.1.

 

Operation of the Machine 

It is completely under the responsibility of the customer itself. On the other hand if the 
customer contacts the manufacturer for some advice, the manufacturer will support the 

customer. 

Check the Appendix 1 to know about the control panel of the machine. 

Steps of the operation 

1)

 

Depending of the height of workpiece adjust the inserts to the closest location to the 

workpiece. 

2)

 

Choose the right teeth form for the bandsaw blade which will be used to cut the 

workpiece. 

3)

 

Adjust the rotational speed and the speed of the Servo controlled table according to the 
workpiece to be cut. 

4)

 

At each bandsaw blade replacement, make sure that the bandsaw blade bearings and 

the inserts touch parallel to the workpiece. This should be done for the one at the lower 

wheel.

 

 

Summary of Contents for DK 1500 LS











































































Reviews:

No comments