manualshive.com logo in svg

Temelsan DK 1500 LS, User Manual, Page: 12 / 74

Share
Download
Temelsan DK 1500 LS User Manual Download Page 12

 

P a g e

 | 11

 

 

 

 

TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ. 

 

Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1 Esenyurt / İstanbul / TÜRKİYE

 

TEL: +90 (212) 544-2518  FAX: +90 (212) 577-6557  www.temelsan.com   [email protected] 

 

8.

 

PREREQUISITS OF TRANSPORTATION 

8.1.

 

Transportation style 

VERTICAL BANDSAW MACHINE is monolithic during the transportation. 

8.2.

 

Precautions 

•

 

The  machine  can  only  be  lifted  by  using  proper  rope  hung  on  the  head  of  the 

machine itself.  

8.3.

 

Conditions for transportation 

The notices of transportations are listed below: 

a)

 

Placing  the  machine  on  the  transporting  vehicle  firmly  and  tightened  with  ropes  to 

eliminate possible bending and vibration during the journey.  

b)

 

The height of the tunnels and the bridges along the travelling route must be taken into 

account. It is very important especially for DK-3500 and above.  

8.4.

 

Storing Conditions 

a)

 

Roof of the storing area must be closed.  

b)

 

There must not be any contact with moisture/water around, on top or under the machine. 

c)

 

It  must  be  prohibited  for  unauthorized  personnel  to  come  across/intervene  with  the 

machine  

d)

 

There must be no risk of fire in the area to be stored. 

After  connecting  the  electrical  cables,  authorized  an  experienced  personnel  will  make  the 

necessary adjustments and commission the machine. 

 

 

 

Summary of Contents for DK 1500 LS











































































Reviews:

No comments