TEMA TELECOMUNICAZIONI
IP PoE Multicast Encoder
AD615/SIP
MAS-AD615SIP-REV00EN
Page 21 of 28
playback (with the "Stop" button). If the manual activation mode is only used, it is not necessary to indicate the start
time.
The shown message is one of the 6 alarm announcement messages that can be found in the "Message
Management".
Periodic activation from table:
if you activate this function, it is possible to indicate in the table below, for each day of the week, up to five different
times, for each of which it is possible to specify one of the six pre-recorded announcement messages.
Periodic activation from file:
it is possible to upload a text file in "csv" format (easily editable with "Excel") that contains, for each day of the year,
up to 5 times in which to make the announcement diffusion. To compile the file simply download the default one
already present (and empty), modify it and re-upload it (do not change the written months, are used by the device
to index itself in the document):
In the example it was indicated that on September 7th (every year) the message 1 should be reproduced at 09.00,
message 2 at 12:30 and message 3 at 17:30 .
Streaming
Since the device does not have a local speaker, it is only possible to play the indicated messages only to a
streming multicast address. To do this it is necessary to insert, after the message number, the letter S followed by
the multicast channel number programmed in the "Audio Channels" mask.
For example: 1S2 means streaming
message 1 to the address programmed on channel 2.
NOTE1:
the playback volume is given by the volume of the multicast channel programmed in AD600 devices receivers.
NOTE2:
since the device does not have its own internal clock, the automatic diffusion of messages can take place only if it
is synchronized with a time server (which can be one into the local network or any other on the internet, see the
"Network parameters" ).
