Teltronics BEM24 Manual Download Page 59

Page: 59 / 89

Repertory Dialing (Changing Numbers)

To Change a Stored Repertory Dialing

1. Lift the handset and press M

UTE

AVE

Hear the confirmation tone.

Press a Repertory Dialing button,

such as REP1. Hear a fast busy tone.

To store a new number at that location:
(continuing after step 2)

3. Dial a new number. Include numbers

for an outside line and area code.

4. Press M

UTE

AVE

. Hear the confir-

mation tone, followed by a dial tone.

To erase the current number at that location: (continuing after step 2)

3. Press M

UTE

AVE

without dialing any numbers. Hear the confirmation

tone, followed by a dial tone.

Note:

If you hear a short busy tone after dialing a repertory dialing button, there
is already a number stored at that location. You can enter a new number,
erase the current number (as shown above), or hang up to keep the
current number.

Your System Administrator can set up as many as 8 repertory dialing
buttons for you.

NUM?

NUM? 195125551212

SELECT SAVE FUNCTION
OR PRESS MENU KEY

Summary of Contents for BEM24


























































































Search results

Summary of Contents for BEM24

Reviews:

Related manuals for BEM24

Brands by name

Popular brands

Teltronics BEM24, Manual

Search results

Summary of Contents for BEM24

Reviews:

Related manuals for BEM24

Brands by name

Popular brands