121
Available parameters:
•
Total Fuel
•
Total Distance
•
Status of brake pedal *
•
Engine Torque *
•
Actual fuel
•
Accelerator pedal position *
•
Status engine brake
•
Speed *
•
RPM
•
Engine hours
•
Vehicle Weight *
•
Fuel level
•
Tachograph data *
*
Availability of parameter depends on vehicle’s model and configuration of FMS interface of the truck.
*J1708 is additional FMS protocol used by some vehicle manufacturers. If your vehicle
supports J1939 and J1708 both protocols then you must disable J1708 in configuration to
receive fuel data.
16.1
General description
CAN works if no USB cable is inserted and isn’t in deep sleep mode;
Uses six different speeds: 50 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps, 1000kbps;
Auto Baud rate detection;
Filtering messages (StId, ExtId) according to configuration;
Using mask, filters required bytes;
Different CAN configurations.
16.2
Configuration
Manual CAN data can be configured using “Manual CAN” in CAN tab, Figure 88 below ( CAN
