110
15.4
Connecting FMB630 Can adapters ALL-CAN300 and LV-CAN200
Connect USB Plug to FMB630 device, connect Light Vehicles Can adapter to other end of
the cable.
Connect Light Vehicles Can adapter Pin 1 and Pin 2 to cars CAN bus. CAN interface location
of the supported light vehicle is described on mounting scheme.
Connect car power supply lines to Pin 3 positive, Pin 4 Negative.
Pins 9, 10 connections are optional it depends on exact car model.
For exact pinout see sticker on Light Vehicles Can adapter.
Figure 83 LV-CAN200 Adapter connection cable pinout
Figure 84 ALL-CAN300 Adapter connection cable pinout
Attention! Ordered LV-CAN200 and ALL-CAN300 packaging may vary:
1.
Standard with mini-USB cable.
2.
USB PCB (female) + mini-USB cable.
Attention! For detailed connection diagram of adapter to light vehicle
please contact Teltonika, LTD sales representative and provide CAR
manufacturer, model and year information.
Attention! Do not swap CAN L and CAN H lines.
Do not swap power supply lines. Make sure that voltage do not exceeds 30V.
Power supply lines should be connected at the end of installation work.
