Teltonika FM6320, User Manual, Page: 40 / 139

40

Send period – GPRS data sending to server period. Module makes attempts to send
collected data to server every defined period. If it does not have enough records
(depends on parameter Min. Saved Records described above), it tries again after
defined time interval.

Min speed – minimal speed the vehicle has to move in order to save record (only if
neither Min Angle nor Min Distance was triggered).

GPRS Context Week Time tab – most GSM billing systems charge number of bytes
(kilobytes) transmitted per session. During the session FM6320 makes connection
and transmits data to a server. FM6320 tries to control the session as much as
possible. Session can last hours, days, weeks or session can be closed after every
connection in certain GSM networks – this depends on GSM network provider. GPRS
Context Week Time defines session re-establishing schedule if session was closed by
network. New GPRS context is opened if 10 minutes are left till time checked in table.
Therefore if all boxes are checked, FM6320 is able to open new connection anytime.
At scheduled time match FM6320 checks for GPRS session activity. If GPRS session is
alive, FM6320 sends data to server according to Send period parameter. If it is not,
FM6320 checks if it is able to re-establish the session.
Figure 29 FM6320 Operator List Configuration
6.3.3.3.2 Scenarios
In Scenarios window forth different scenarios are available. Three scenarios (Eco/Green
Driving, Immobilizer/ Authorizing driving and Over speeding) have six possible states: disabled,
no DOUT control, DOUT1 control, DOUT2 control, DOUT3 control, DOUT4 control. Excessive
idling scenario have two states: Disable and Enable. All scenarios can be activated at the same
time and all scenarios that use DOUT can control the same DOUT. Scenarios configurable
parameters are shown in
6.3.1.7.1 . All values of these parameters are described in chapter 11.