Teltonika FM6320, User Manual, Page: 123 / 139

123
It is also possible to configure Vehicle Data element using SMS or GPRS according to basic
FM functionality, parameters described in table 32
TACHOCHECK SMS
“tachocheck” sms message can be sent to device. It is used for getting status
information. SMS response is of such structure:
CAN_2:[TRC],[ABCD], K-Line:[K]
[T] – Tachograph presence on bus:

0 – Tachograph doesn’t respond on bus;

1 – Tachograph responds on bus.
[R] – Response to OpenRemoteSession validity check:

0 – Wrong or unknown response (failed to open RemoteSession);

1 – Tachograph responds positively (RemoteSession opened successfully).
[C] – Response to CloseLastAuthenticationSession validity check:

0 – Wrong or unknown response (failed to close last authentication session);

1 – Last authentication session closed successfully, device is ready to open
new authentication session.
[K] – K-Line data presence on bus:

0 – K-Line data not present on bus;

1 – K-Line data present on bus.
[ABCD] – FMS data presence on bus:

0000 – FMS data not present on bus

Non-zero – FMS data detected on bus.
FMS data value is shown in hexadecimal system and it is not important for the client.
15
RFID
Radio-frequency identification (RFID) is the use of a wireless non-contact system that uses
radio-frequency electromagnetic fields to transfer data from a tag attached to an object, for the
purposes of automatic identification and tracking. FM6320 can be configured in a way to use
with an RFID reader. When an RFID of some sorts (typically a plastic card with a magnetic line) is
used with an RFID reader which is connected to FM6320, the device creates a record with the
data that the RFID reader has read and can be sent to a server with all other information. RFID ID
is activated like an I/O parameter (Figure ).
Figure 67 RFID I/O parameter
To set up FM6320 so it can be connected to an RFID reader, Global parameters have to be
set up. Go to extermal devices and set up COM2 settings to RFID Mode or RFID MF7 Mode (the
used mode depends on the mode that the RFID reader works). See Figure . The Baudrates for
each mode are:
RFID Mode – 57600
RFID MF7 Mode – 9600