34
Figure 24 FM5500 Global parameters
Table 8 Global parameters description
Parameter Name
Parameter description
Profile change on
event
Allows selecting profile switching method: 1 SIM Operator List, 1 SIM
On Event, 2 SIM Operator List (see details in chapter 6.4).
Voice settings
Allows to setup microphone sensitivity and speaker loudness level.
Call Settings
Allows entering one number to which FM5500 will be able to call to.
Call trigger defines input, which will be used to receive or make a call.
Usually to that input a button is connected (“Digital Input 1” is not
allowed, because this input is dedicated for ignition).
Record Settings
Are used to switch between two data sending modes: starting from
newest records or starting from oldest record. Active data link timeout
defines how many seconds should FM5500 keep connection to the
server before disconnecting after successful data transfer. Note that
even if it disconnects from server, it always keep active GPRS session.
Analog input
settings
Defines maximum input voltage on analog input. Possible cases are: all
inputs 0-30V, 0-10V, two inputs 0-10V while other two 0-30V maximum
input range has impact on precision – values on 0-10V input are
measured more precisely than 0-30V (higher resolution).
Accelerometer
settings
Defines accelerometer sensitivity range (0.5g, 1g, 1.5, 2g), how many
seconds should movement be detected by accelerometer in order to
set movement for FM5500 application and how many seconds after
movement is not detected by accelerometer FM5500 application
should treat like movement is still there.
Static Navigation
settings
Allows enabling or disabling functionality.
GNSS Settings
Allows choosing compatibility mode and satellite System.
COM1 Settings
Allows configuring COM1 baud rate, parity and flowing control.
