Registration Instructions
Tips & Tricks
Telstra
GO Mobile
Smart Signal Repeater
Quick Start Guide
Telstra GO is an evolved cellular repeater
design that can amplify cellular signals.
Connect a single Donor External Antenna to
receive the macro-network signals, and then
a single indoor Service Antenna where you
need service, and Telstra GO will do the rest
automatically once you register.
• Keep
Donor
and
Service Antennas
separated/isolated from each other for best performance
• For best performance, the cable between the
Donor Antenna
and GO unit should be as short as possible
• Use sealant if any connections are exposed to elements
Telstra GO Smart Signal Repeater
The status indicator LED will be blinking RED. Wait for the system to
complete the network selection which
can take between 5 to 7 minutes.
When complete, the user interface will indicate that
registration is
required from the Wave App.
The status
indicator LED
AUTO
3G
4G LTE
To install your Telstra Go Mobile Smart Signal Repeater, follow the instructions in the Quick Start
Guide. To register your Telstra Go Mobile Smart Signal Repeater follow the instructions below:
YOU MUST REGISTER THIS DEVICE BEFORE IT WILL WORK
STEP 1
STEP 2
STEP 2
Smartphone or Tablet
With your smartphone or tablet,
complete registration by using the
Cel-Fi WAVE application (Android
or iOS).*
Cel-Fi Desktop
Application
Optionally, use the Cel-Fi
desktop application to
complete registration.
Go to the
App Store
or the
Google Play Store
and search
for “Cel-Fi WAVE” to download the free app.
Launch the Cel-Fi WAVE app in
close proximity
to the
Telstra GO Mobile Unit.
Once the application has connected to the Telstra GO Mobile
Smart Signal Repeater, you will be prompted to register.
* Requires Bluetooth 4.1 and Android 4.3 or above.
From your computer, visit
www.cel-fi.com/software
and
download the appropriate desktop application.
Attach a Micro-USB
(not included)
cable from your computer
to the Telstra GO Mobile Unit.
Launch the Cel-Fi WAVE desktop application.
Once the application has connected to the Telstra GO Mobile
Smart Signal Repeater, you will be prompted to register.
STEP 3:
STEP 4:
STEP 5:
STEP 3:
STEP 4:
STEP 6:
STEP 5:
Connect/Pair
to Smart Signal
Repeater
OR
Connect to
Smart Signal
Repeater
Copyright © 2019 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity and Cel-Fi logos are
registered trademarks of Nextivity Inc. All other trademarks or registered trademarks listed belong to their respective
owners. Designed by Nextivity Inc in California.
qsg_go-mobile-telstra-eng_19-1105
For more information and helpful videos about the installation and registration of the Telstra GO system, please visit
www.
cel-fi.com/register.
As part of the registration process Telstra will collect your private information including name, contact
details and location. Please see our Privacy Policy at
https://www.telstra.com.au/privacy/privacy-statement
for more details.
For Telstra Support, call:
13 2200 or
13 2000 for Business Customers
telstra.com/smartantenna
IN THE BOX
• Telstra GO Mobile Repeater
• Quick Start Guide
• Donor & Service Antenna
• Warranty Card
• Mounting Screws
• 12V CLA Power Supply Unit
7
8
