Telsey Telecommunications
-
8
-
•
Use dedicated power circuits or power conditioners to supply reliable electrical power to the
device.
Installation on a desktop
•
If you are installing the Switch on a table, be sure that the table is level and secure; attach the
four protective feet, if available, to the bottom on the unit. Do not attach the protective feet if
you are wall-mounting the switch.
Wall-Mounting Installation
The switch can be mounted horizontally on a wall using the keyholes on the bottom of the switch. The
screws, plastic anchors, and other materials necessary to mount the switch on a wall are not provided.
To wall-mount the switch, perform the following procedure:
z
If attached, remove the rubber feet, data cables, and power cord from the switch.
z
Select a wall location for the device.
z
Install two plastic anchors and two screws into the wall, separated by 85.34 millimeters.
Position the switch onto the wall screws so that the ports and LEDs are facing up.
To connect network devices to the Switch, follow these instructions:
Summary of Contents for FS100 series
Page 1: ......
Page 31: ...Telsey Telecommunications...
