Telrad CPE-12000SG-PRO-1D-3 Series User Manual Download Page 110

Page: 110 / 110

LTE Outdoor CPE12000 | User Manual

110

About | Status

About > Status

This section shows CPE basic information.

Service Provider:

As titled.

Product Name:

The name is composed of functions provided by CPE.

Model ID:

The ID used by the manufacturer.

Serial ID:

The ID used by the operator.

IMEI:

International mobile equipment identity.

IMSI:

International mobile subscriber identity.

Firmware Version:

The version of the firmware.

Firmware Creation Date:

As titled.

Bootrom Version:

The version of the bootloader.

Bootrom Creation Date:

As titled.

LTE Support Band:

The supported LTE band

Summary of Contents for CPE-12000SG-PRO-1D-3 Series















































































































Search results

Summary of Contents for CPE-12000SG-PRO-1D-3 Series

Reviews:

Related manuals for CPE-12000SG-PRO-1D-3 Series

Brands by name

Popular brands

Telrad CPE-12000SG-PRO-1D-3 Series, User Manual

Search results

Summary of Contents for CPE-12000SG-PRO-1D-3 Series

Reviews:

Related manuals for CPE-12000SG-PRO-1D-3 Series

Brands by name

Popular brands