Telrad CPE-12000SG-PRO-1D-3 Series, User Manual

Page: 106 / 110

LTE Outdoor CPE12000 | User Manual 106
Monitoring | Iperf
Monitor >Iperf
Iperf is a tool to measure network environment such as throughput, packet loss and delay
jitter. Typically, to use Iperf, there should be a client and a server. The server opens a port
and waits for clients to build the connection. Iperf in CPE only plays as a client.
Settings

Status: Enable/Disable Iperf.

Last Measurement Date/Time: As titled.

Server Address: As titled.

Server Port: As titled.

Management Port: To do bi-directional transmission, CPE opens “management
port” to let the server transmit data to itself.

Management Time: The time to do Iperf recording.

Protocol Type: TCP or UDP .