TP-8/16/24/32/64S User Manual Version No.: V1.2
- 62 -
Chapter VI Appendix
Appendix I Basic Configuration Commands
This section includes:
Command line interface profile: It focuses on introducing how to log onto the command line interface,
command line format and characteristics;
Compressed chip configuration: It focuses on introducing the configuration commands and methods
related to compressed chip;
Network parameters configuration: It focuses on introducing the configuration commands and
methods related to network parameters;
System parameters configuration: It focuses on introducing the configuration commands and methods
related to system.
6.1 Profile of Voice Command Line Interface
6.1.1 Command Line Entry
Users can get access to command line interface via the two ways as follows.
Link target board with PC via serial port, and then make use of super terminal and other software to
log in;
Link target board with PC via network port, and then make use of Telnet login software to log in;
Under either login method, it needs to import the default username and password to log in. The default
username is admin, and password is psw.AG. How to configure the users with different authorities,
refer to section 1.2.4. Now it is possible for you to operate all introduced commands. See command
line login interface as follows:
6.1.2 Command Line Prompts
CLI mould’s command line prompts include the following two levels:
