Telos Alliance LINEAR ACOUSTIC ARC, Installation & User Manual

Page: 19 / 72

Chapter 4 |
9
Installation and Initial Setup
Loudness Display Screen
Pressing the Right button once more brings you to the Loudness Display screen which shows a numeric medium-term loudness
value of each processed path, Program 1 and Program 2.
Figure 4-3 – Front panel Loudness screen
Each program can be given a “friendly” name to help identify it via the remote interface, and you may choose between LKFS
and LUFS as units of measure.
Program Display Screen
Another press of the Right button takes you to the Program Display for Program 1. Push the Right button again to show the
display for Program 2.
Figure 4-4 – Front panel Program screen
Like the Loudness Display screen, the Program Display screen shows the medium- term loudness measurement at the output
of the APTO processing engine as a numeric LKFS or LUFS value. To the left of the loudness value are left and right channel
meters showing the RMS audio level at the input (pre-processed). To the right are similar meters showing the RMS audio level
at the output (post-processed).