TelNet FXS:
Phone with ATA Adapter
User Guide
TelNet Worldwide, Inc. | telnetww.com | (800) 508-1254
Page 5
telnet-fxs-phone-with-ata-adapter-20211008-UG
Do Not Disturb (if enabled)
How to enable Do Not Disturb
1. Lift handset. Press
✱
78#
.
2. All incoming calls will be redirected to voicemail without ringing the phone.
How to clear Do Not Disturb
1. Lift handset. Press
✱
79#
.
Voice Portal / Voicemail Access
1. Lift handset. Press
✱
86#
.
2. Follow prompts of the Voice Messaging Menu.
Speed Dial 8 (1-digit codes) (if enabled)
Setup and update 1-digit speed dial codes for frequently dialed numbers.
How to set up/update Speed Dial 8 (1-digit codes)
1. Dial
✱
74
and listen for tone.
2. Enter the 1-digit code plus the 10-digit phone number you would like assigned. (Recorded message confirms
code was programmed.)
How to place call using Speed Dial 8:
1. Press the 1-digit speed dial code followed by
#
.
Speed Dial 100 (2-digit codes) (if enabled)
Setup and update 2-digit speed dial codes for frequently dialed numbers.
How to setup/update Speed Dial 100 (2-digit codes)
1. Dial
✱
75
and listen for tone.
2. Enter the 2-digit code plus the 10-digit phone number you would like assigned. (Recorded message confirms
code was programmed.)
How to place call using Speed Dial 100
From phone –
1. Press
#
plus the 2-digit speed dial code and press
#
again.
