3 AUX IN MODE
3.1 Connect the speaker by 3.5mm stereo cable, manual switch
into AUX mode, then use your smartphone or other connected
device to play music.
3.2 When playing music, the blue LED light will be on and flash
slowly by 1000ms speed, when pause the speaker, the LED light
will stop flashing.
3.3 When playing music, long press of the volume “+/-” button
to turn up and down the volume. Short press for Next /
Previous.
3.4 Unplug the audio line speaker in the default AUX mode.
Switch to the wanted mode if you need other functions
4. FM MODE
4.1 When switch to FM mode, please insert the line-in cable as
the antenna. When listening the FM, you can press the play
button to enter the automatically searching channel mode.
4.2 After the searched channel is saved, short press the "+ -"
button to adjust the up and down radio, and long press the "+ -"
button to adjust the volume.
4.3 In radio mode, if you want to operate "Bluetooth" "AUX
function", please press the mode button to switch mode. The
SD card inserted is by default detected to enter the SD card
play.
5. CHARGING
5.1 Use the micro USB power cable to connect the speaker and
PC or 5V adaptor, then it will start to charge, the red LED
indicator will light on.
5.2 When charge is full, the red LED indicator will turn off.
6. LOW POWER PROTECTION
6.1 When battery power is lower than 3.3V over than 15s, there
is a warning sound, and then speaker will POWER OFF
